Showing posts with label drop slumping. Show all posts
Showing posts with label drop slumping. Show all posts

Monday, January 7, 2008

Checkered Green & Orange Fused Glass Plate

fused checkered glass plateI'm still experimenting with my medium of the moment, Warm Glass! I just love the way this "wavy/ruffled" oh so happy colored checkered serving plate turned out!

I used Bullseye (BE) 90 COE opalescent glass-green & orange. I cut two 3 inch squares for each color. I laid them down with the opalescent on the kiln paper. I added a 6 1/8 inch square piece of irridized glass on top and did a full fuse in my kiln, annealed and waited patiently until it cooled ( the oh so hard part...it is so tempting to peek!)

I cold worked the edges by beveling with my grinder and then giving the edges a good clean with a wire brush and water.

I "dusted" ceramic fiber blanket "chunks" with kiln wash* and placed them randomly along the outer edges of the square plate (the plate has been flipped so the irridized glass is now on the bottom) making sure the chunks allowed the plate to slump in the middle.

I then placed this set up in the kiln and slumped, annealed and once again waited patiently for the plate to cool.

I love the "organic" wave/ruffle design on the outer edges of this design and the bold, bright and happy colors!

Checkers with a twist anyone? :)

P.S.
I got this "dusting tip" from the Warm Glass boards. If you are a fused glass addict like myself, it is a wonderful resource!

Saturday, December 29, 2007

Drop Slumping with Kaiser Lee Board

I purchased Kaiser Lee board from Art Glass Decor in Lewisville to make a square mold that I could drop slump a plate/dish.
side view of a drop slumped fused glass plate
I cut the Kaiser Lee board into a 6 inch square and then cut a 5 inch square from the middle ( so I had an inch edge). I sanded it wearing a mask and then coated it with kiln wash so my glass wouldn't stick. I let the mold dry for 3 days; the board really soaks up the kiln wash!

I cut a 6 inch square of clear art glass (bottom) and white orange opal (top) plus four inch squares of deep forest green white opal (placed) in each corner.I fully fused the 6 inch square in my kiln and then slightly beveled the edges prior to placing on the mold.

I set the mold on one inch kiln posts and drop slumped. I love the way the green starts to drop into the bowl at each corner. I love the way it turned out even though I had to cut my mold....I learned that I need to "flash cool" the process just as the glass hit the kiln floor....otherwise the bottom is too big for the mold to slide off! OOPS! No worries. I will be able to use the kaiser lee board I cut for other things!!!

Has anyone else used Kaiser Lee Board and had an OOPS moment that they would like to share so we can all learn???

P.S.
This design is NOT for sale...I'm making some funky serving dishes for my mom. She wants an eccletic mix! I think this qualifies! ;)